{"product_id":"car-circuit-tester-power-probe-automotive-diagnostic-tool-electrical-current-voltage-scanner-tool-6-24v","title":"Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V","description":"Description: \u003cbr\u003e\n-It is a comprehensive 6-24V DC test kit. \u003cbr\u003e\n-Its long cable makes your testing easily.     \u003cbr\u003e\n-It allows you to track and locate short circuits.\u003cbr\u003e\n-It can also test for continuity with the assistance of its auxiliary ground lead.    \u003cbr\u003e\n-The unit has short-circuit protection and can test for bad ground contacts instantly.  \u003cbr\u003e\n-The unit is the best electrical tester for reducing diagnostic time in automotive electrical systems. \u003cbr\u003e\n-After a simple hook-up of the unit to the vehicle's battery, automotive technician can conduct a positive or negative battery\u003cbr\u003e\ncurrent to the tip by rocking the power switch forward or backward.\u003cbr\u003e\n-Overload Protection ---Buzzer Warning.The test pen has overload power-off protection. If the current is too large or the load\u003cbr\u003e\nis too heavv during the power distribution process.the test pen will be disconnected to protect the battery and a beep warning.\u003cbr\u003e\n-Double Insulation Protection. Safe and reliable measurement The instrument uses insulation material national safety\u003cbr\u003e\ncompulsory certification (CCC).\u003cbr\u003e\n  \u003cbr\u003e\nSpecification: \u003cbr\u003e\nName: Circuit Finder Tester; \u003cbr\u003e\nOperation Voltage: 6-24V DC; \u003cbr\u003e\nMaterial Type: plastic and metal; \u003cbr\u003e\nItem Width: 20mm\/0.79inch; \u003cbr\u003e\nItem Length: 220mm\/8.66inch; \u003cbr\u003e\nLead Length: approximately 4M \/157.5inch; \u003cbr\u003e\nItem Type: Electrical Testers \u0026amp; Test Leads; \u003cbr\u003e\nOverload protection: 8A (When the current exceeds 8A, this item will disconnect the current automatically.); \u003cbr\u003e\nFunction : Polarity Testing \/ Continuity Testing  \/Testing Components in Vehicle's Electrical System \/ Grounding Testing \/ Short Circuit Following and Locating \/ Checking Short Circuit; \u003cbr\u003e\n  \u003cbr\u003e\nAutomatic Identification of Positive and Negative: \u003cbr\u003e\n-LED light prompt, quickly identify positive and negative. \u003cbr\u003e\n-LED light is bright green, Indicates the probe output positive voltage or the probe test is the negative voltage. \u003cbr\u003e\n-LED light is red, Indicates that the probe outputs a negative voltage or the probe is tested as a positive voltage. \u003cbr\u003e\n  \u003cbr\u003e\nTesting: \u003cbr\u003e\n1.Polarity Testing\u003cbr\u003e\nThis tool can test uncertain polarity of contact in the circuit of vehicle. \u003cbr\u003e\n-Unroll the leads. \u003cbr\u003e\n-Connect red clip to positive terminal of vehicle's battery. \u003cbr\u003e\n-Connect black clip to negative terminal of vehicle's battery.\u003cbr\u003e\n-Contact the probe tip to a positive (+), the LED should light RED. \u003cbr\u003e\n-Contact the probe tip to a negative (-), the LED should light GREEN. \u003cbr\u003e\n2. Continuity Testing\u003cbr\u003e\n-Unroll the leads. \u003cbr\u003e\n-Connect red clip to positive terminal of vehicle's battery. \u003cbr\u003e\n-Connect black clip to negative terminal of vehicle's battery. \u003cbr\u003e\n-Connect auxiliary ground lead to one side of tested wire along with probe tip connecting to the other side. When\u003cbr\u003e\ncontinuity is present,the LED will light GREEN. If LED does not light up, no continuity present. \u003cbr\u003e\n3.Testing Components Out of Vehicle's Electrical System\u003cbr\u003e\n-Unroll the leads. \u003cbr\u003e\n-Connect red clip to positive terminal of vehicle's battery. \u003cbr\u003e\n-Connect black clip to negative terminal of vehicle's battery. \u003cbr\u003e\n-Connect auxiliary ground lead to negative terminal of tested component. \u003cbr\u003e\n-Press button to (-) side with LED lighting RED. Contact the probe tip to positive terminal of tested component to\u003cbr\u003e\nactive the component.If LED turns to GREEN with buzzer sounding, stop testing and check the component if defective\u003cbr\u003e\nor not, or rating current of component is higher than that of this tester. \u003cbr\u003e\n4. Testing Components in Vehicle's Electrical System\u003cbr\u003e\n-Unroll the leads. \u003cbr\u003e\n-Connect red clip to positive terminal of vehicle's battery. \u003cbr\u003e\n-Connect black clip to negative terminal of vehicle's battery. \u003cbr\u003e\n-When component' scontrol switch is located at the side of positive terminal of component, press button to \"-\" side to\u003cbr\u003e\nhave LED light RED. Contact probe tip to the positive terminal of component.The component will be activated. \u003cbr\u003e\n5. Jumper Lead Operation\u003cbr\u003e\nThe black clip and auxiliary ground lead are connected directly through the unit. User can consider it as a long jumper\u003cbr\u003e\ntest lead by leave the red clip disconnected from the battery.\u003cbr\u003e\n6.  Jumper Lead Operation\u003cbr\u003e\nFor some components of which neqative terminal is required to be well grounded for large current fowing, this tester\u003cbr\u003e\nis a good tool to test their grounding.\u003cbr\u003e\n-Unroll the leads.\u003cbr\u003e\n-Connect red clip to positive terminal of vehicle's battery.\u003cbr\u003e\n-Connect black clip to negative terminal of vehicle's battery.\u003cbr\u003e\n-Press button to\"-\"side, the LED should light RED, and positive voltaqe is supplied. Then have the probe tip quickly contact\u003cbr\u003e\nnegative terminal of component as dose as possible, LED indicator turns to GREEN with buzzer sounding, which means it\u003cbr\u003e\nis well grounded. If NOT, the LED remains RED without any buzzer.\u003cbr\u003e\n7. Short Circuit Following and Locating\u003cbr\u003e\n-Unroll the leads.\u003cbr\u003e\n-Connect red clip to positive terminal of vehicle's battery.\u003cbr\u003e\n-Connect black clip to negative terminal of vehicle's battery.\u003cbr\u003e\n-Press button to \"-\" side, the LED should light RED, and positive voltage is supplied.\u003cbr\u003e\n-Remove the blown fuse from the fuse box and begin trackinq from two terminals of the fuse socket.Use probe tip quickly\u003cbr\u003e\ncontact wire. If LED lights GREEN with buzzer, short circuit or overloading component appears in this side. Please note this\u003cbr\u003e\nwire' s color or identification code. Follow the wire as far as you can alonc the wiring harness. Locate the color-coded wire in\u003cbr\u003e\nthe harness and expose it. Cut the wire. Follow the wire in the shorted direction and repeat this process until the short is located.\u003cbr\u003e\nIf there are components in the following wire, check the components individually if good or not.\u003cbr\u003e\n  \u003cbr\u003e\nNote: \u003cbr\u003e\n1. Do not use on AC voltage.\u003cbr\u003e\n2. Don't use it if it is damaged.\u003cbr\u003e\n3. Don't use this item when driving.\u003cbr\u003e\n4. Before driving, please always make sure that the vehicle is safe and reliable.\u003cbr\u003e\n5. The unit is not to be used with 110\/220V house current, it is only use for DC 6~24V systems.\u003cbr\u003e\n6. After you finishing checking vehicle, correctly restored all the connection-s which you disconnected.\u003cbr\u003e\n7. Never touch any dangerous part of the vehicle with your hand for safety. Don't touch any live conductor with hand or skin.\u003cbr\u003e\n8. Do not use the item around explosive gas, vapor, or dust. When the power switch is pressed (or rocked), battery current is\u003cbr\u003e\nconducted directly to the tip which may cause sparks when contacting ground or certain circuits.\u003cbr\u003e\n9. Always follow the instructions and procedures indicated in the vehicle's service manual before attempting to disconnect any\u003cbr\u003e\npart or subsystem of the electrical circuit.\u003cbr\u003e\n10. Some components of vehicle work on low voltage, they cannot withstand the voltage allied by the item. To avoid damage for\u003cbr\u003e\nthese components, don't use the item to apply voltage directly or indirectly.\u003cbr\u003e\n  \u003cbr\u003e\nPackage Included: \u003cbr\u003e\n1 X Circuit Tester; \u003cbr\u003e\n1 X User Manual (in English).","brand":"GreenZech","offers":[{"title":"Default Title","offer_id":44647717241002,"sku":"GZTA-49-01-AM","price":31.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0280\/6179\/4375\/products\/4fe6822d-8199-424c-9d8a-c0ea718d2596.jpg?v=1681703598","url":"https:\/\/greenzech.com\/products\/car-circuit-tester-power-probe-automotive-diagnostic-tool-electrical-current-voltage-scanner-tool-6-24v","provider":"GreenZech","version":"1.0","type":"link"}