Description: 30° flat bottom PCB engraving bit TiAlN Coated carbide CNC engraving tool. Specification: Material:Carbide; Surface Treatment:TiAlN Coated; Type:Flat Bottom Engraving Bits; Shape:V-shape; Degree:30°; Shank diameter:3.175mm; Cutting edge diameter:0.1/0.2/0.3/0.4/0.5mm (optional); Total length:33mm; Quantity:1pc; Features: TiAlN coating, high temperature resistance, better processing. Have sufficient bending...

Specification: Material: Carbide; Surface Treatment: TiAlN Coated; Type: Flat Bottom Engraving Bits; Shape: V-shape; Degree: 90°; Shank diameter: 3.175mm; Cutting edge diameter: 0.1/0.2/0.3/0.4/0.5mm (optional); Total length: 33mm; Quantity: 1pc. Features: TiAlN coating, high temperature resistance, better processing; Have sufficient bending strength and wear resistance;...

Description: High-efficiency solar panels, super battery life. Large-capacity built-in metal lithium battery, unobstructed battery life on cloudy days. Accurately monitor tire pressure and tire stability throughout the process. LCD high precision liquid crystal display. High volume alarm sound warning. Various tire pressure units available....

Features: RTL.SDR 100KHz-1.7GHz Receiver: -Color: Silver/Champagne shell. -Material: ABS+PMMA. -Can set automatic search scan. -The analog subtone and digital subtone can be cracked by software. -The ID of common digital walkie-talkies can be cracked by software and the voice signal can be demodulated. -The...

Description: 1. The P.BOX feed box needs 3.7V 18650 (battery not includes). It is the only active antenna that does not require an external power supply and integrates a charge management chip. The MICRO USB charging port is compatible with the 5V charging head...

Description: 0.1mm 15 Degree Titanium Coated Carbide Flat Bottom PCB Engraving Bit CNC Router Tool. Specification: Material:Tungsten Steel; Surface Treatment:Titanium Coated; Type:Flat Bottom Engraving Bits; Shape:V-shape; Degree:15°; Shank diameter:3.175mm; Cutting edge diameter:0.1 mm; Total length:35mm; Quantity:1 PC; Features: Carbide rods and tungsten steel rods, with high hardness, high...

Description: Insulation resistance tester (or high-voltage insulation meter) is a special instrument for measuring insulation resistance. At present, electrical equipment (such as transformers, generators, etc.) is developing towards large-capacity, high-voltage, structural diversification and sealing. This requires the insulation resistance tester itself to have the...

Features: Pure copper sheet, high purity, fine organization, the oxygen content is very low. Nonporous, trachoma, loose, conducting performance is excellent. Electric high erosion of the mold surface accuracy, the heat treatment process, the electrode had no direction. Suitable for  fine playing, good thermal channel,...

Features: 1. 2 in 1 multi-stripping and cutting pliers, sharp blade. 2. During stripping, the wire is held firm by clamping jaws. 3. Precise blade design without damaging the conductor cores. Specification: Material:Steel + plastic; Size:133x52mm; Stripping range:0.2-3mm²; Package Included: 1 x Wire Stripper

Description: 0.2-5A CNC Engraving Machine Stepper Motor Driver Controller Single Axis. Specification: -Automatic idle-current reduction. -Supply voltage up to 50V DC. -Output current up to 5.0A. -High speed optoelectronic isolation signal input. -Single-chip PWM bipolar sinusoidal chopper ensures low vibration and high efficiency. -1,...

Feature: Detection voltage: DC2.5V ~ 30V Working current: <30mA. Display: 0.28 inch LED. Dimensions: 31 x 12.0 x 9mm (length x width x height). Installation hole: 23 x 10 mm. Measurement rate: 200mS / times. Accuracy: 1% (+/- 1 word). Red line is the...

Feature: Reverse does not burn, the number does not shake. Digital tube: 32 x 10 x 13mm (L x W x H). Board: 35 x 16mm. Power supply: 7-30V, high brightness LED digital tube. Color: red, blue, green, yellow (optional). Voltage: Range: 0-33V, error...

Specifications: Color: Red, Blue, Green. Detection voltage: 2.8~30V. Working voltage: 2.8~30V/0-100V. Working current: less than 30mA. Installation hole: 23×10mm. Type: DC2.8V-30V Two Lines, DC0-100V Three Lines. Minimum working voltage: 2.8V. Maximum working voltage: +30V. Operating temperature: -10~+65℃. Measurement rate: ≥200mS/times. Accuracy: 3%(+/-1word). Working humidty: 10~80%(No condensation)....

Specifications: Name: Electronic Hanging Scale. Remote control range: ≤10 meters. Load range: ≤125%. Weighing range: 0.2kg-1000kg. Reading range: 3-7 seconds, within 10 seconds. Operating temperature range: -30 ℃ ~ 60 ℃. Features: - Highlighted. LED reading display panel, still clearly visible in the sun....

Product information:Cable Specification: UL20276 (1/0.254BC*1P+AL+M)*5+1/0.254BC*4C+D(1/0.254BC)+AL+F.OD= 5.5mm.Color: Black.Plug: Steel Casing Gilded 1U ", Terminal Gilded 3U".IC: The Newest Terminal Amplification Program.Shell: Injection Molding.All material conform with ROSH.Using the best HD Signal Amplifier Chip Project, the signal is more stable.Adopting Terminal Amplification Program and to restore...

Features: Energy saving design. Plug and play. With On/Off push button. Easy and convenient to use. Perfect for bathrooms, bedrooms, and anywhere you need some extra light. Specifications: Voltage: AC220V. Rated power: 0.2W. Material: Plastic. Lampshade Color: Milky White. Light Color: White /Yellow. Control Mode: On/Off Push Button. Size:...

Features: This0-0.2w FM transmitter  is a newly designed model featured by portable size,high quality, long broadcasting range and stable performance. It had 4 levels of power output, powered by 1000mah li-on battery. The maximum working time is 12hours at the lowest power level. It has...

Description: 0.3-3.20mm Mini Hand Twist Drill With Chuck Aluminum Manual Hand Drill. Specifications: Material: Aluminium Alloy. Chuck Clamping Range:0.3-3.2mm. Suitable for wood, plastic,rubber,model and others material to drilling hole. Steel, iron,stone,hard things do not fit. The Scope Of Application:Drilling Wood,Jin Gang,Linden,Horn,Amber,Olive, Walnut, Plastic And Other...

Description: 0.3-3.4mm Black Drill Bit Chuck Adapter Three-Jaw Drill Chuck Brass Base with Silver Wrench. Features: -Three - jaw head design, can be clamped 0.3-3.4mm range. -Tail is brass, Drill Chuck is aluminum alloy, rugged and durable. -Ideal for combined use with a hand...

Description: 0.3-3.6/0.3-6.5/0.6-8mm Keyless Drill Chuck 1/4 Inch Hex Shank Quick Change Adapter Converter. Features: 1. Quickly convert your quick change hex shank driver into a drill!; 2. Instantly convert impact driver to hold non-quick change drill and driver bits; 3. Keyless chuck finger-tightens for...