Description:  58x2400x5mm EVA Foam Faux Teak Sheet Boat Yacht Synthetic Teak Decking Gold Black.  Specification:  Material: EVA(Ethylene-vinyl Acetate).  Size: 58x2400x5mm.  Color: Gold + Black.  Quantity: 1pcs.     Features:  1. High-quality EVA(Ethylene-vinyl Acetate) environmental protection materials.  2. Elastic, not easy deformation.  3. High tensile elongation,...

Description: 4pcs Zinc Alloy Pillow Block Flange Bearing 8mm Bore Diameter KFL Series.     Specification:  Material: Zinc Alloy.  Type: KFL08 8mm.  Quantity: 4pcs.     Features:  -- The bearing has a wide inner ring with two set screws for attaching to the shaft.  -- This...

Description: 45 Degree CNC Puller Bolt Pull Stud for CNC Milling Collet Chuck Tool Holder.     Specification:  Degree: 45°.  Diameter: 16.5mm.  Length: 43mm.  Thread: M12.  Hardness: 54-57HRC.  Quantity: 1pcs.     Features:  With cryogenic treatment and thermal aging treatment.  Wear resistance, anti-rust and anti-corrosion.  Precise...

Description: 45 Degree CNC Puller Bolt BT Pull Stud for CNC Milling Collet Chuck Tool Holder.     Specification:  Degree: 45°.  Diameter: 23mm.  Length: 60mm.  Thread: M16.  Hardness: 54-57HRC.  Quantity: 1pcs.     Features:  With cryogenic treatment and thermal aging treatment.  Wear resistance, anti-rust and anti-corrosion. ...

Description:  Disassembly Tool Wrench for MT1-2 Drill Chuck Sleeve Morse Taper Adapter.     Specification:  Material: Steel.  Height: 20mm.  Thickness: 5mm.  Length: 140mm.  Cone length: 105mm.  Quantity: 1pcs.     Features:  High strength, high hardness and high toughness impact resistance.  Convenient and improve efficiency.  Suitable for...

Description: 10pcs 8x10x12mm Ball Bearing Bushing Copper Alloy Bearing Bushing. Specification: Material: copper alloy. Inner Diameter: 8mm. Outer Diameter: 10mm. Item Height: 12mm. Quantity: 10pcs. Features: It has the characteristics of high load-bearing capacity, impact resistance, high temperature resistance and self-lubricating ability. It is...

Description: 32mm 34KG Magnetic Hook Holder Neodymium Magnet Red/Yellow/Blue Hook Magnet.     Specification:  Material: NdFeB.  Max. Vertical tension: 34kg.  Horizontal tension: 3.4kg.  Max Temperature: 80(℃).  Color: Red/Yellow/Blue.  Surface Treatment: Nickel Plating.  Diameter: 32mm.     Are You Tired Of Clutter?  With our magnetic hooks you...

Description:  25x30mm 22KG Neodymium Recovery Magnet Red/Yellow/Blue Eyebolt Hook Magnet Metal Detector.  Specification:  Material: NdFeB.  Max. Vertical tension: 22kg.  Horizontal tension: 2.2kg.  Max Temperature: 80(℃).  Color: Red/Yellow/Blue.  Hook: Eyebolt Hook.  Surface Treatment: Nickel Plating.  Diameter: 25mm.  Height: 30mm.     Application:  1. Can be used...

Description: 25mm 22kg Neodymium Recovery Magnet Metal Detector Circular Eyebolt Magnet Red/Yellow/Blue.     Specification:  Material: NdFeB.  Max. Vertical tension: 22kg.  Horizontal tension: 2.2kg.  Max Temperature: 80(℃).  Color: Red/Yellow/Blue.  Hook: Circular Eyebolt.  Surface Treatment: Nickel Plating.  Diameter: 25mm.     Application:  1. Can be used for...

Description: 5pcs 8mmx30mm Cylinder Magnet Round Rare Earth Neodymium Magnet.     Specification:  Diameter: 8mm.  Height: 30mm.  Material: NdFeB magnetic material.  Grade: N52.  Quantity: 5pcs.     Features:  1. Round Cylinder Magnet Shape, Machined Silver Steel Finish. Durable Lasting Shine, Perfect for Refrigerator Magnets, Office Magnets, Whiteboard...

Description: Pull Chain Switch.   Specification: Color: green. Materials: plastic up shell+phenolic base. Size: 40x27x22mm. Rating: 3A 250VAC/6A 125VAC. The main purpose: lighting dedicated.   Features: L.1.2.3 four holes, L for the public, 123 for the gear. Four wire hole plug in the side of the switch, hand drawn switch. Lighting switch, easy to install, can be...

Description: 16-38mm 120 Degree Silicone Hose Elbow Bend Multi-size Vacuum Hose Tubing Turbo Coolant Tube. Specification: Material: Silicone rubber. Color: Black. Arm Length: Approx. 150mm/3.93". Angle: 120°. Wall thickness: Approx. 5mm/0.19". Under pressure: 0.3-0.9Mpa. Operating temperature range: -65 degrees -250 degrees. Inner diameter(Approx.): 38mm/1.49"....

Description:  80/100mm 5Pcs M10 Press Plate Clamp CNC Engraving Machine Tabletop Steel Press Plate Fixture Accessories Set.     Specification:  Material: Steel.  T-type screw diameter: 10mm.  White screw diameter: 10mm.  Butterfly nut diameter: 10mm.  Steel plate(L x W): S - 82 x 30mm, L -...

Description: 10pcs Synchronous Belt Clip Stainless Steel Sawtooth for 6mm Width Timing Belt. Specification: Material: Stainless steel. For belt width: 6mm. Quantity: 10pcs. Features: Suitable for 6mm timing belt. Convenient to use and clip firmly. Durable and long service life. Package Included: 10 x...

Description:  8x63mm Handwheel with Rotating Handle Machinery Parts.     Specification:  Material: plastic, metal.  Bore diameter: 8mm.  Wheel diameter: 63mm.  Color: Black.     Features:  With removable twist grip and threaded hole for easy attachment of the handle; common use for industrial machine tools,  such as...

Description:  1pc VCGT11T302/04/08-AK H01 Turning Tool Cutters DCGT32.51-AK H01 Inserts Used for Aluminum.     Specification:  Material: Metal.  Color: Sliver.  Length 19mm.  diameter 6mm.  height 4mm.  Usage: Thread Turning Tool.  Fit for:  Aluminum, aluminum alloy, copper and other nonferrous metals and alloys. Not for steel. ...

Description: 10pcs Aluminum Profile Aluminum Extrusion Accessories Inside Corner Connector Bracket for 3030 Series. Specification: Material: Zinc alloy. Quantity: 10pcs. Features: Easy to replace. Used as right angle connector. Suitable for 3030 aluminum profile extrusion frame. Durable and long service life. Uasge: When the...

Descriptions: CNC Milling Engraving Press Plate Clamp Fixture Fastening Platen Router.   Specifications: Material: nylon + iron. Size: 85mm.   Features: - High strength steel plate, strong and durable. - Lightness, convenience, good toughness, no scratches on any material. - The service life od the butterfly nut is prolonged.   Package Included: 1 x Butterfly Nut. 1 x...

Description: 12/16/20mm SBR Linear Rail Shaft Stop Collar Shaft Limit Fixing Ring CNC Parts. Specification: Material: Aluminium alloy. Quantity: 1pcs. Size: 12/16/20mm(Inner diameter x Outer dimeter x Thickness). 12mm x 30mm x 10mm. 16mm x 35mm x 12mm. 20mm x 40mm x 12mm. Features:...

Description: V-Slot Aluminum Alloy Spacer Block for CNC Machine Part V-Slot Gantry Plate Aluminum Extrusions Accessories.     Specification:  Material: Anodized Aluminum.  Color: Black.  M5 tapped holes to allow mounting to the V-slot gantry plate.  3 holes that allow for mounting of full size wheels. ...