Overview: The module uses high-quality chips, high efficiency (up to 95%), low heat generation, maximum 5A current, and TI's op-amp control output current, making the overall output very stable. This module uses a low-ESR filter capacitor to reduce ripple voltage to 50mV! Features: Module...

Technical parameters:  Operating voltage 1.8V-4.5V, suitable for Li-ion LiFePo4 LTO.     Working principle:  capacitive degree of fly transfer charge porter, equalizer board connected to the battery will be above the start of equalization work, using the original new ultra-low internal resistance MOS, 2OZ copper...

Features:  1. Good anti-interference performance and high reliability.  2. Low operating temperature and long service life.  3. Wide input voltage range, (100-240V) in line with global usage standards.  4. Good insulation performance and high electric strength.  5. Full load high temperature burning machine, 100%...

Note before buying:  Note: WiFi connection is a test function, due to poor compatibility of some computers, if you cannot connect PC software via WiFi, please ignore this function. Forthis function, we do not provide any guarantee and technical support,  and we will decide whether...

   Feature:  Input: 10V-30V.  Output: 5.3V8A.  Input port: 5.5 2.1 female interface compatible with 5.5 2.5 (direct wire access).  Output 6 USB interface features: custom iron silicon aluminum inductance, increase input and output with TVS protection support 12V car 24V large truck use, synchronous...

What is it?  It is an upgrade version of 18650 Pi Partner V3.     Why did you make it?  I want to use a simple solution to solve the power problem of Pi.     What makes it special?  5V/2A Input(Type-C 5V/2A,MicroUSB 5V/1A).  5V/3A Output. ...

Specification:  Continuous discharge current limit: 28A, 2A.  Discharge protection current limit: 42A, 2A.  Charging limit voltage: 14.6V.  Continuous charging current limit: 24A, 2A.  Charging protection current limit: 42A, 2A.  (Single cell) Overcharge voltage: 3.65V, 0. 025V.  (Single cell) Overcharge release voltage: 3.55V, 0. 08V. ...

Features:  1. Wide input voltage range.  2. With overload, short circuit, and undervoltage protection functions.  3. Black plastic shell, small size and high efficiency.  4. Full load aging test.     Specification:  Voltage: 5V1.5A LS-10D5, 9V1A LS-10D9, 12V0.8A LS-10D12, 24V0.4A LS-10D24.  Input voltage: 100-220V.  Input voltage range:...

Note:  This product is a step-down module and cannot be boosted! The input voltage is 55V, and the output voltage can be adjusted from 0-50V. If the output voltage is 12V, the minimum input voltage should be 14V. The input voltage should not exceed...

Technical Parameters:  basic requirements: 5V 40A  200W, Common (No fan).  Dimensions: 200*110*50mm.  Operating temperature: -10°C to +50°C, 20% to 95% RH (no condensation).  Storage temperature: -20°C to +85°C, 20% to 95% RH (no condensation).  Temperature Coefficient: 0.02~0.05%/°C.  Heat dissipation method: Natural cooling.  Rated voltage range:...

Specifications:  Resistor: 0.1ω-50Mω.  Capacitor: 25pF-100000uF.  Inductance: 0.01mH - 20H.  Working power: DC-9V.  Standby current: 0.02uA.  Operating current: 25mA.  Material: Metal+Plastic.  Size: about 11.1cm/4.37"x2.6cm / 1.02"x8.5cm/3.34".  [Conversion: 1cm=0.3937 inch, 1inch=2.54 cm]    Description:  1. Add boot voltage detection function.  2. Automatic detection of NPN and...

Features:  Imported components, high reliability. Built-in WMI filter, anti-jamming performance.  DC ripple is small, high efficiency. Design soft-start circuit, AC surge current limit.  Low operating temperature and long service life. Wide input voltage range, in line with global standards.  Insulation performance, high electrical strength....

Descriptions:  Protection: short circuit protection, overcurrent protection,overvoltage protection.  AC input: AC110-240V.  AC frequency: 50Hz / 60Hz.  Output voltage: DC36V.  Output Current: 5-6.5A.  Output Power: 180W (Maximum 220W).  Size: 11.5 x 6.5CM.  Mounting Hole Size: 10.58x5.57CM.  Overload current:> 6.5A.     Package included:  1 x 36V 180W...

Specification: Voltage measurement range: DC00.0-99.9V. Time measurement range: 0-99h59min. Current measurement range: DC00.0-50.0A (50A range), DC00.0-99.9A (100A range). Power measurement range: 0-999.9-5000W (50A range), 0-999.9-9999W(100A range). Temperature measurement range: -15 °c ~60°c. Capacity accumulation range: 0-999.99-9999.9 Ah. Energy accumulation range: 0-99999Wh-9999KWh. Voltage measurement accuracy: ±...

Specification:  Power board: 220V 100W.  Pendulum: 50W 40KHZ.  Applies to: Low-power ultrasonic cleaning machine, household cleaning machine, ultrasonic generator built machine.     Feature:  The ultrasonic generator can monitor the power system frequency ultrasound power.  According to different requirements of users, real-time adjustment of various...

Tips:  Due to appearance and weight issues, we have tried our best to protect the product, but collisions and other problems may occur during transportation, and the appearance of the product may be slightly curved. You can try to use tools for some repairs....

Feature: The power supply is fully isolated industrial grade built-in power module with temperature protection, overcurrent protection and short circuit full protection, AC85 ~ 265V wide voltage input, high and low voltage isolation, DC12V1A 5V1A dual isolated output voltage, 431 regulated, output with EMI...

Specification:  Adapt battery type: NCM /LFP / LTO (Li-ion/Lifepo4/LTO) fully compatible.  power supply:  The minimum total voltage of battery pack is greater than 30V. Recommended values: Li-ion battery>10S, Lifepo4 battery>12S, LTO battery>20S; If the battery pack voltage is lower than 30V. external power suppIv is reauired. ...

Feature:  Output power: 400W.  Output voltage: DC12/24/36/48/60V (Optional).  Input voltage: 110V/220V AC.  Ambient temperature: -10 ° C ~ +50 ° C.  Adjustable voltage: ±10%.  Product size: 215 x 115 x 50mm.     Specifications:  Output DC voltage: 12V; 24V; 36V; 48V; 60V Rated current: 33.3A;...

Specification:  Module nature: non-isolated boost module.  Module size: length 65MM* height 23MM* (width 56.5MM including heat sink).  Input mode: IN+ input positive, IN- input negative.  Output mode: OUT+ output positive, OUT-output negative.  Wiring method: no soldering, terminal.  Input voltage: 10-32V.  Output voltage: continuously adjustable...