Description: 10pcs 6700-2RS 10x15x4mm, 10x16x5mm double shielded miniature deep groove ball bearing. Specification: Bearing material: Chrome Steel(Gcr15). Scroll columns number: Single column. Raceway type: Deep groove raceway. Seal cap: Double sealed. Roll body: Steel ball. Precision grade: P0. Color: Silver Tone. Seals type: 2RS(Two side rubber). Size:...

Description:  8x200/300/400/500/600/700/800/900/1000mm Optical Linear Ball Bearing Rail Guide Support CNC Set.  The linear shaft is widely used in the automatic transmission device, such as industrial automatic machine, automatic recorder, computer, p recision printer, etc.  Colleagues due to hard, you can extend the life of...

Description:  700mm Cylindrical Linear Rail Shaft with 2pcs SBR12UU Linear Block.     Specification:  Materials: axis - 45 carbon steel optical axis, the surface chrome hardened hard axis; bracket - aluminum.  Guide Rail Accuracy: g6 level.  Guide Rail Hardness: Axial hardness of 58-60 degrees (HRC58-60o). ...

Description:  M6 x 1mm Right Hand Thread Rod End Joint Bearing 6mm Female Thread Joint Bearing.     Specification:  Type: Rod End.  Material: steel.  Ball: bearing steel.  Body: Carbon steel.  Bore Size: 6mm.  Appliance: Auto, Tractor, Mechine Tool, Electric machine.  Fit for Budget Motorsport, Marine...

Description: 10pcs Carbide Insert Titanium Coated Carbide Cutter Turning Tool Lathe Blades. Blade safety good toughness matrix and MTTiCN, thick Al2O3, TiN coating of excellent combination; suitable for steel semi finishing. Specifications: Material: Tungsten Carbide. Size: 6x6mm. Thickness: 2.5mm. Applications: suitable for steel semi...

Description:  500mm Linear rail fully supported shaft rod with 2pcs SBR12UU bearing slide blocks.     Specification:  Material: Axle - 45 Carbon Steel.  Optical Shaft Bracket - Aluminum.  Guideway accuracy: Axis accuracy of g6 level.  Guide hardness: Axial hardness of 58-60 degrees (HRC58-60o).  Linear rail...

Description:  200mm Super long metal cross slide, longitudinal slide block Z010M for lathe, used when feeding / relieving axis X,Y, Z.     Specification:  Type: Metal Cross Slide.  Material: Zinc alloy and aluminium alloy.  Max stroke: 200mm.  Parameter: 230mm×50mm×50mm(LxWxH).  DIY Supplies: Woodworking.     Application:  For X, Y, Z three-dimensional processing...

Description:  DC 6V Micro Plastic Gear Motor Permanent Magnet DC Eccentric Shaft Motor.     Specification:  Material: Metal + Plastic.  Diameter: 50mm.  Quantity: 1pc.  Usage: Mainly used for Mechanical watch clock box.  Voltage: DC 6.0V.  No-load speed: 10rpm.  No-load current: 0.06A.  Rated power: 0.45W.  Rated...

Description: 12-36V 30A 500W Adjustable Speed Controller DC Brush Motor Speed PWM Controller Adjuster with Control Switch. It's a PWM speed controller so it enables you to control the speed of these little DC brush motors smoothly. It's ideal for applications like fans, etc....

Description:  25x25x50mm Boring Holder for Quick Change Tool Post Holder.     Specification:  Material: Aluminum.  Size: 25x25x50mm.  Quantity: 1pcs.     Note:  Please note that this item is only suitable for the tool post.     Features:  Easy to install.  Good rigidity, high precision machining.  Durble and...

Description: 25x25x50mm Cut-off Blade Holder Cut-off Tool for Quick Change Tool Post Holder.   Specification: Material: Aluminum. Size: 25x25x50mm. Quantity: 1pcs.   Note: Please note that this item is only suitable for the tool post in the link.   Features: Easy to install. Good rigidity, high precision machining. Durble and long service life.   Package Included: 1 x Cut-off Blade Holder 

Description:  Square hex collecy closer holder lathe tools, 5C collet block chuck set.     Specification:  Color: Silver and Black.  Sauare for 5C collers: 4.4x4.4x7cm.  Hex for 5C collers: 2.5x4.4x7cm.  Quick clamping handle: 3.5x4.5cm.     Features:  - High hardness, high precision.  - Can be used in high-precision...

Descriptions:  12V Double Shaft Reduction Gear Turbine Worm Self-locking Low Speed Motor Encoder Signal Feedback.     Specifications:  Type: Reduction Motor.  Motor Type: Brushless motor.  Material: Metal.  Voltage: DC 12V.  Weight: 172g.  Power: 3W.  Speed Regulation: Yes.  Rotation In Both Directions: Yes.  Size:  Outer Dia.:...

Description:118mm Metal cross slide, longitudinal slide block Z008M for mini lathe, used when feeding / relieving axis y,z.Specification:Type: Metal Cross Slide.Material: Zinc alloy and aluminum alloy.Max stroke: 32mm.Parameter: 118mm*53mm*20mm.DIY Supplies: Woodworking.Application:Z, Y processing advance and retreat knife use.Package Included:1 x Metal cross slide

Description:15.8mm Stainless Steel Transfer Bearing Unit Conveyor Roller Wheel Mounted Ball Bearing.Specification:Material: Stainless Steel.Ball diameter: 15.8mm.Length: 50mm.Wide: 32mm.Height: 21mm.Mount distance: 38mm.Features:Smooth moving,low friction,high performance and long life.Package Included:4x Ball Bearing

Description: 100-1200mm Linear Rail Guide with HGH20CA Linear Rail Guide Block CNC Parts. Specification: Material: Steel. Length: 100/200/300/400/500/600/700/800/900/1000/1100/1200mm. Width: 20mm. Quantity: 1pcs. Features: High precision, smooth, high wear resistance and low noise. Advanced production technology, precise products, high hardness and durability. High bearing capacity...

Description: 15pcs 300mm Optical Axis Guide Bearing Housings Aluminum Rail Shaft Support Screws Set CNC Parts. Specification: Type: Sliding Rail. Glide Path: Linear Guide. Material: 45 Steel. Accuracy Class: H. Slide Fixed Way: Lock Type, Lock Type. Features: Non-toxic and tasteless, environmental protection, small...

Description:  Ignition coil spark plug set fits for Husqvarna 61 162 266 Jonsered 630 670 Chainsaw old type.     Specification:  Quantity: 1 set.  Compatible With: For Husqvarna 61 162 266 Jonsered 630 670 Chainsaw part.     Features:  - Replace your old or damaged parts. ...

Description: 10pcs TCMT110204 VP15TF / TCMT21.51 VP15TF Carbide Inserts Lathe Turning Tool Holder CNC Inserts. Specifications: Material: Carbide. Size: approx. 11*2.38mm. Diameter of hole: approx. 3.6mm. Machining Process: finishing and semi-finishing. Quantity: 10pcs/box. Features: Mainly used for steel, stainless steel finishing and semi-finishing rough...

Description: 1.8°20 Hybrid Stepper Motor Two Phase 30mm Motor For CNC Mill Router Cutter. Specification: Motor length: 30mm. Diameter of axle: 4mm. The front shaft length: 10mm. Outgoing line: 300mm (Plug is not included). Scope: 3D Printers, Monitor Equipment, Medical Machinery, Textile Machinery, Packaging Machinery,...