Description
xFeatures:
RTL.SDR 100KHz-1.7GHz Receiver:
-Color: Silver/Champagne shell.
-Material: ABS+PMMA.
-Can set automatic search scan.
-The analog subtone and digital subtone can be cracked by software.
-The ID of common digital walkie-talkies can be cracked by software and the voice signal can be demodulated.
-The signal received by the antenna is converted into data by this receiver and sent to the computer, Android phone and other devices through the USB interface. The software on the computer and Android phone and other devices processes the demodulated signal, displays the frequency spectrum , and arbitrarily sets the reception. Bandwidth, signal recording, saving, playback and other functions. Through SDR software, receiving electromagnetic waves in the range of 100KHz-1.7GHz supports AM, FM (NFM, WFM), CW, DSB, LSB, USB demodulation. Can be used to listen to short-wave single-sideband communications, FM radio, intercom calls, aviation bands, meteor monitoring ADS-B decoding, AIS signal reception, etc.
-Technical characteristics: This receiver has a built-in 1 ppm temperature compensation crystal [TCXO]. Make the frequency more stable and accurate. The almost zero temperature drift [2 ppm initial deviation, 1 ppm temperature drift] increases the internal chip heat dissipation , making the work more stable.
-Using the latest RTL2832U + R820T2 solution (R820T2 tuner has slightly better sensitivity than R820T, lower background noise and higher signal-to-noise ratio. Can work more stably at frequencies around 1.5 GHz. )The Q channel on the RTL2832U is used to increase the direct mining reception of the frequency of 100KHz-24MHz. Achieved 100KHz-1.7GHz full segment reception. Support XP Win7, Win8, Win10, for MAC, Android and other systems.
RTL2832SDR 25MHz to 1760MHz Receiver:
-Color: Green shell.
-This is a new generation of software defined radio receiver RTL SDR with RTL2832 ADC chip, 0.5 PPM TCXO, SMA F connector and passively cooled aluminum housing. Music from 25 MHz to 1760 MHz bandwidth.
-Free software for use as a radio scanner with free computer-based software such as SDR, HDSDR, SDR-Radio, Linrad, GQRX or SDR Tap on Android.
-Applies to Windows, for MacOS, Linux, Android and even embedded Linux computers such as For Raspberry Pi.
Free software for a variety of applications including universal wireless scanning, air traffic control, radio security, for ADS-B aircraft, ACARS, trunked radio, P25 / MOTOTRBO digital voice, POCSAG, weatherballoons, APRS, NOAA weather satellite APT, Meteor M2 satellite, radio astronomy, meteor scatter monitoring, DAB, or as a low-cost platform for traditional ham radios.
-This model incorporates a new solution ADC RTL. It uses an improvement of this tuner with a 0.5 PPM TCXO (no drift, with initial accuracy and 1 PPM PPM 0.5 temperature deviation), increased tolerance of the part and an SMA connector F.
-Requires USB 2.0 port , And works with most USB 3.0 ports (note that we can not guarantee that this feature will work on all USB 3.0 ports, so make sure your PC has a USB 2.0 port, just in case).
Installation in Windows is easy. Please visit For Google's free RTL-SDR Quick Start Guide for installation instructions.
Package Included:
1 x Software Receiver.
1 x Suction Cup Mount.
2 x Telescopic Antenna
RTL.SDR 100KHz-1.7GHz Receiver:
-Color: Silver/Champagne shell.
-Material: ABS+PMMA.
-Can set automatic search scan.
-The analog subtone and digital subtone can be cracked by software.
-The ID of common digital walkie-talkies can be cracked by software and the voice signal can be demodulated.
-The signal received by the antenna is converted into data by this receiver and sent to the computer, Android phone and other devices through the USB interface. The software on the computer and Android phone and other devices processes the demodulated signal, displays the frequency spectrum , and arbitrarily sets the reception. Bandwidth, signal recording, saving, playback and other functions. Through SDR software, receiving electromagnetic waves in the range of 100KHz-1.7GHz supports AM, FM (NFM, WFM), CW, DSB, LSB, USB demodulation. Can be used to listen to short-wave single-sideband communications, FM radio, intercom calls, aviation bands, meteor monitoring ADS-B decoding, AIS signal reception, etc.
-Technical characteristics: This receiver has a built-in 1 ppm temperature compensation crystal [TCXO]. Make the frequency more stable and accurate. The almost zero temperature drift [2 ppm initial deviation, 1 ppm temperature drift] increases the internal chip heat dissipation , making the work more stable.
-Using the latest RTL2832U + R820T2 solution (R820T2 tuner has slightly better sensitivity than R820T, lower background noise and higher signal-to-noise ratio. Can work more stably at frequencies around 1.5 GHz. )The Q channel on the RTL2832U is used to increase the direct mining reception of the frequency of 100KHz-24MHz. Achieved 100KHz-1.7GHz full segment reception. Support XP Win7, Win8, Win10, for MAC, Android and other systems.
RTL2832SDR 25MHz to 1760MHz Receiver:
-Color: Green shell.
-This is a new generation of software defined radio receiver RTL SDR with RTL2832 ADC chip, 0.5 PPM TCXO, SMA F connector and passively cooled aluminum housing. Music from 25 MHz to 1760 MHz bandwidth.
-Free software for use as a radio scanner with free computer-based software such as SDR, HDSDR, SDR-Radio, Linrad, GQRX or SDR Tap on Android.
-Applies to Windows, for MacOS, Linux, Android and even embedded Linux computers such as For Raspberry Pi.
Free software for a variety of applications including universal wireless scanning, air traffic control, radio security, for ADS-B aircraft, ACARS, trunked radio, P25 / MOTOTRBO digital voice, POCSAG, weatherballoons, APRS, NOAA weather satellite APT, Meteor M2 satellite, radio astronomy, meteor scatter monitoring, DAB, or as a low-cost platform for traditional ham radios.
-This model incorporates a new solution ADC RTL. It uses an improvement of this tuner with a 0.5 PPM TCXO (no drift, with initial accuracy and 1 PPM PPM 0.5 temperature deviation), increased tolerance of the part and an SMA connector F.
-Requires USB 2.0 port , And works with most USB 3.0 ports (note that we can not guarantee that this feature will work on all USB 3.0 ports, so make sure your PC has a USB 2.0 port, just in case).
Installation in Windows is easy. Please visit For Google's free RTL-SDR Quick Start Guide for installation instructions.
Package Included:
1 x Software Receiver.
1 x Suction Cup Mount.
2 x Telescopic Antenna
Compare color
- Choosing a selection results in a full page refresh.