0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill

Descriptions:
0.3-6.5/0.3-4mm Wood Carving Drill Chuck Hang Shank with Flexible Shaft for Electric Grinding Drill.

Features:
- Multi-purpose machine for metal grinding, wood cutting, jade drilling and jade polishing;
- The product uses an electric grinder with a flexible shaft to easily solve pipes, interfaces and corners that were difficult to reach;
- The handle is small and easy to grasp, suitable for fine polishing, engraving and sanding operations;
- Rubber design, light weight, more suitable for long hours of operation;
- The length of the flexible shaft is approximately 890mm, which extends the working range.

Specifications:
Type:
A - Black rubber flexible shaft;
B - Silver stainless steel flexible shaft;
C - 0.3-6.5mm golden hang shank with rubber flexible shaft;
D - 0.3-4mm silver hang shank with rubber flexible shaft.
Size
A:Soft shaft length: 990mm;
Soft shaft diameter: 9.4mm;
B.Shaft length: 790mm;
Shaft diameter:6mm;
Soft shaft material: rubber;
C:Handle - 148*26mm;
D:Handle - 139*26mm;
Weight
A - 326g;
B - 314g;
C - 497g;
D - 478g;

Note:
Before using the soft shaft, it is best to install the machine first. After running for 15 minutes at low speed, the parts inside will be run-in.  There will be a little heat within 1-2 hours after use. After the running-in period, it can be used normally without odor.

Instructions:
- When inserting, the bump on the flexible shaft is aligned with the inner notch of the tail of the hanging mill, and then squeezed after pressing;
- Small wrench to tighten the clamping head (clockwise tightening, counterclockwise loosening).
- Replace the hose core: First, unscrew the internal screws with a hexagon socket, then remove the entire shaft to replace.

Package Included:
1 Pc x Flexible Shaft / Flexible Shaft with Hang Shank