DESCRIPTION
Features:
- With Voltage & Current & Temperature Display.
- Support detection for the Vpmax for the panel, Not just charging voltage.
- 32 bit MCU high-speed kernel ARM CORTEX, CPU running speed 72MHz.
- 13 new function LCD menu, Adjustable charging parameters.
- One-click to restore factory Settings, One-click to reboot.
- Fully 3-stage PWM charge management.
- Build-in short-circuit protection,open-circuit protection,reverse protection, Over-the-load protection.
- ST/IR/ Infineon imported dual MOS MOSFET for anti-reverse circuit
- 1oZ copper foil thickness, applicable in -35 ~60°C, high-temperature protection.
- Use ±1% high precision resistance, the high-temperature solid-state capacitor on the PCB board with thickness over 2mm.
- Ultra-low power consumption 12mA@12V.
- Double USB 5V 2A.
Applicable Battery Type:
- B01: lead-acid battery (13.7V).
- B02: lithium polymer battery (12.6V).
- B03: lithium iron phosphate battery (14.4V).
Specification of 30A Controller:
Rated Voltage: 12/24V Auto-Adaptive.
Rated Current: 30A.
Applicable Pmax & Voc in 12V Solar System: 390W, 15-25V.
Applicable Pmax & Voc in 24V Solar System: 780W, 30-50V.
Equalization: 14.4V.
Float charge: 13.7V (defaul,adjustable).
Discharge stop: 10.7V(defaul,adjustable).
Discharge reconnect: 12.6V(defaul,adjustable).
Charge reconnect: 13V.
Voltage of open light: Solar panel 8V(Light lights delay).
Voltage of close light: Solar panel 8V(Light off delay).
USB output: 2 way USB output,5V/2A(Max.).
Self-consume: <12mA.
Operationg temperature: -35-60°C.
Size: 132mmx70mmx32mm.
About the Charging & Dis-Charging Current Display:
- The controller is mainly designed for the high current solar system, The current may not display in 3 situations: Low-wattage panel, Weak sunlight, Low-wattage appliance.
- The display is more accurate when the current is higher (>1A).
About the Temperature Display:
Charging will stop at >80.
Charging will restart at <70.
System connection:
1. Connect the battery to the charge regulator-plus and minus.
2. Connect the photovoltaic module to the regulator-plus and minus.
3. Connect the consumer to the charge regulator-plus and minus.
Package included:
1 x PWM Solar Charge Controller 30A
1 x User Manual
